Motion Control Guide
HomeLearnProductsSuppliersEventsResourcesNewsBlogContact Us
Learn
Products
Suppliers
Events
News


Can you provide a custom IP65 stepper motor

Can you provide a custom IP65 stepper motor?

Special shaft modifications are available, as well as cable, connector and encoder adders.

Related Questions

What temperatures are stepper motors able to run at?

Most stepper motors are made with Class B insulation. This allows the stepper motor internal wiring to sustain temperatures of up to 130 degrees Celsius. With an ambient temperature of 40 Celsius, the stepper motor has a temperature rise allowance of 90 Celsius. Stepper motors can run continuously at these temperatures.

What applications would a bipolar stepper motor be used for?

A bipolar stepper motor is best used in a situation that would require high torque at low speeds.

What is the difference between a Unipolar and a Bipolar stepper motor?

The main difference between unipolar and bipolar stepper motor is the center tap connections. A unipolar motor is wound with six lead wires, each of these having a center tap. These would be used in applications needing high torque with high speed. Whereas a bipolar stepper motor has four lead wires but has no center tap connections. Bipolar stepper motors are used when you require high torque at low speeds.

What applications would a unipolar stepper motor be used for?

A unipolar stepper motor would be best used in an instance where you would require a motor with high speed and high torque.

What is a stepper motor?

A stepper motor is a brushless DC electric motor that works by dividing a full rotation into a number of equal steps. The motor can be stopped at any of the steps without any feedback sensor as long as the motor is accurately sized for the application.

When should I use microstepping?

microstepping is used in applications requiring the motor to operate at less than 700 PPS. At low pulse rates, stepper motors to less smooth and often vibrate.

What is a unipolar stepper motor?

A unipolar stepper motor is one of the two basic types of two phase stepper motors. The unipolar motor has one winding with a center tap per phase. Typically the center tap is made common, giving three leads per phase and six leads for the typical two phase motor. Mostly these two phase commons are internally joined making the motor have five leads. A micro controller or stepper controller can be used to control drive transistors in the right order, creating an ease of operation making the unipolar stepper motor the cheapest way to gain precise angular movements.

What is a bipolar stepper motor?

A bipolar stepper motor is a type of two phase stepper motor that has a single winding per phase. The current in t5he winding of this type of motor needs to be reversed in order to reverse a magnetic pole, thus making the drive control on bipolar stepper motors much more complicated.

What is a stepper motor?

Stepper motors are DC motors that turn in distinct steps. At every step the motor holds its position needless of power, thus eliminating the necessity for feedback positioning sensors, so long as the motor is properly sized and no steps have been skipped. The removal of feedback requirements and the digital nature of a stepper motor makes it simple to integrate into digital systems.

What are the differences between Step and Servo motors?

Step motors are permanant magnet motors that "Step" one increment each time the computer gives its control electronics one pulse. These motors do not need position feed back (if run within their limits). When stopped they automatically hold their position. Servo motors are DC motors with an encoder feedback loop. The computer reads the position of the motor and controls the power that is applied to the motor. Servo motors move faster point to point and are better at accelerating heavy machinery. They have more power at high speeds than a stepper motor, and can spin much faster, generally 3000-6000 rpm. A step motor has lots of low speed power, however it should not be run faster than 800 rpm since torque falls off quickly. A Servo system knows where the machine is while cutting, and knows whether the motor is under heavy load or an axis has jammed and will stop the machine. A stepper system does not have feedback and does not know whether or not it has jammed or lost position. In this aspect, a servo is more reliable. Step motors are just as accurate as Servo and, additionally, are simpler and maintance free in harsh and/or dusty applications.

What is stepper motor resonance?

Resonance refers to an unstable condition while running a step motor. Resonance often occurs between 2-4 rev/sec, and can be alleviated in many situations by placing a load on the motor, changing from full stepping to half or micro-stepping, and/or increasing your acceleration through the resonance zone.

What is a stepper motor controller?

A stepper motor controller, commonly referred to as a motion controller, is a system that controls the rotation of motors with the purpose of moving a mechanical component to a determined position. Motion controllers should not be confused with motor drivers, which are the power component of a positioning system. The leaders are those systems based on a PC that give the signals for the motors through the parallel port.

What temperatures do step motors usually run at?

Most step motors include Class B insulation. This allows the step motor to sustain temperatures of up to 130 degrees C. Therefore, with an ambient temperature of 40 degrees C, the step motor has a temperature rise allowance of 90 degrees C allowing for step motors to run at high temperatures.

Is it possible to get more torque by running a step motor at double its rated current?

It is possible to increase torque by increasing the current but by doing so, it will weaken the motor's ability to run smoothly and will also make the temperature of the motor rise. Please do not run the step motor above the internal temperature of its class rating.

What do holding brakes do on a step motor?

Holding brakes do not slow the shaft of a motor, instead they hold it in place. If 24V is supplied to the brake, the brake is "released" and the motor shaft is free to spin. If 24V is not supplied to the brake, it locks position, and holds the motor shaft in place.

What frame sizes do the High Torque Stepper Motors come in?

Our NEMA Frame sizes range from 08-42 for our High Torque Stepper Motors.

What is the IP65 Rated Sealed Stepper Motor protected against?

The IP65 is a rating of its protection. The "6" tells us it is completely sealed from dust. The "5" means that its is resistant to jets of water from any angle.

What type of environments are ideal for Stepper Motors that are IP65?

Stepper Motors that are IP65 rated for harsh environments. These IP65-rated stepper motors meet the splash-proof requirements of most applications with humid or damp environments.

Are the Shafts sealed on the IP65 Stepper Motors ?

Yes, the sealed shafts add protection for the stepper motors, which allows for longer life cycles.

Can IP65 stepper motors come in higher IP ratings?

Yes, they can come in higher IP ratings. It is recommended that customers call in and discuss application requirements.

What are the advantages of using step motors?

Speed can be easily determined and controlled by remembering that speed equals steps per revolution divided by pulse rate.
2. A step motor can make fine incremental moves.
3. A step motor doesn't require encoder feed back (Open loop).
4. Non-cumulative positioning error.
5. Excellent low speed/high torque characteristics without gear reduction.
6. Holding torque of the step motor can be used to hold loads in stationary position without over heating.
7. Ability to operate on a wide speed range.

How fast can I run my step motor?

Most stepper motors are designed for low speed (3000 rpm or less) operation. Once you get into higher speeds, servo motors are typically used.

How fast can our stepper motors run?

Most stepper motors are designed for low speed (3000 rpm or less) operation. Once you get into higher speeds, servo motors are typically used.

What are the six types of stepper motors that we sell?

The six different types of stepper motors that we carry and sell are High Torque (Square) Stepper Motors, Standard (Round) Stepper Motors, Permanent Magnet(PM) Stepper Motors, IP65 Rated Seal Stepper Motors, Stepper Motors with Integrated Drivers, and Stepper Motors with integrated Drivers and Controllers.

How can 4 wire, 6 wire and 8 wire stepper motors be connected?

First of all two drivers exist Unipolar and Bipolar, Unipolar drives output to 6 leads of a step motor and Bipolar output to 4 leads of a step motor. So a 4 lead motor can only be connected to a Bipolar driver. A 6 lead and 8 lead motor can either be connected to a Unipolar driver and or a Bipolar driver. A wiring diagram shows the possible connections.

How many electrical phases are in a stepper motor?

The number of electrical phases in a stepper motor is defined as the number of independent winding coils being used.

Which Stepper Motors are compatible to stepper motor drIver DPD?

The stepper motor driver is compatible to high-torque stepper motors, consider our popular 23Y, 34Y, 42Y. Or standard torque (round-bodied) motors: 23W, 34W, 23D, 34D, and 42D.

What is the difference between a 4-wire and 6-wire stepper motor?

What is the difference between a 4-wire and 6-wire stepper motor?

How many types of stepper motors are there?

There are three different types of stepper motors, Permanent Magnet, Variable Reluctance, and Hybrid.

Why is my stepper motor stalling?

In some cases, stalling of a stepper motor causes a large voltage spike that often damages the phase transistors on the driver. Some drivers are designed to protect themselves from such occurrences. If not, Transient Suppression Devices can be added externally. Consult the factory for further information.

Additional Information









Motors    (View All) (Most Popular)
      All Motors
      AC Motors
      Brushless Motors
      DC Motors
      Servo Motors
      Stepper Motors

Controllers    (View All) (Most Popular)
      All Controllers
      AC
      Brushless
      DC
      Servo
      Stepper


Copyright 2013-2014 MotionControlGuide.com - index - trade show index